Overview of Fumed Silica

Fumed silica, also known as pyrogenic silica, is an ultra-fine, high-purity amorphous silicon dioxide (SiO2) produced via the combustion of silicon tetrachloride in an oxygen-hydrogen flame. It appears as a fluffy white powder and is valued for its ability to thicken, stabilize, and reinforce materials.

Features of Fumed Silica

• High Surface Area: Typically ranges from 50 to 380 m²/g, providing excellent thickening and reinforcing properties.
• Hydrophilic or Hydrophobic Variants: Available in both forms depending on surface treatment, allowing for tailored applications.
• Excellent Thixotropy: Increases viscosity and improves flow properties of liquids and pastes.
• Chemical Inertness: Resistant to most chemicals, making it suitable for a wide range of industrial uses.

•  Enhances free-flowing properties and stability.

(Fiberglass VIP Panels Energy-Saving Fumed Silica Vacuum Insulation Panel For Building Roof Construction)

Specification of Fiberglass VIP Panels Energy-Saving Fumed Silica Vacuum Insulation Panel For Building Roof Construction

Our Fiberglass VIP Panels deliver top insulation for building roofs. They use fumed silica sealed under vacuum inside a tough fiberglass layer. This design traps heat extremely well. It keeps indoor temperatures stable year-round. You save big on heating and cooling costs.

These panels are thin but powerful. Typical thickness ranges from 10mm to 50mm. They take up minimal roof space. Standard panels measure 1200mm by 600mm. Custom sizes fit special projects. The thermal conductivity stays ultra-low at 0.004 W/mK. This beats traditional insulation like foam or fiber mats.

Durability matters. The fiberglass skin resists weather, chemicals and physical damage. Panels handle temperatures from -50°C to 200°C. They won’t sag or decay over time. Fire safety is built-in. The materials meet Class A fire ratings. No toxic fumes release if exposed to flames.

Installation stays simple. Lightweight panels cut easily onsite. Workers place them quickly between roof beams. No special tools are needed. The vacuum seal stays intact during handling. Panels connect tightly. They prevent thermal bridging at joints. Air leaks don’t happen.

Energy efficiency is proven. Buildings need less fuel for climate control. Utility bills drop noticeably. The panels pay back their cost in under five years. They work for warehouses, factories and homes. Roofs stay cooler in summer. Indoor comfort improves without extra equipment.

Maintenance is nearly zero. Panels withstand rain, snow and UV exposure. They don’t attract pests or mold. Performance holds steady for decades. No compression or settling occurs. The vacuum core won’t degrade.

(Fiberglass VIP Panels Energy-Saving Fumed Silica Vacuum Insulation Panel For Building Roof Construction)

Applications of Fiberglass VIP Panels Energy-Saving Fumed Silica Vacuum Insulation Panel For Building Roof Construction

Fiberglass VIP panels are special insulation for building roofs. They use vacuum insulation technology. This technology makes them extremely effective. The core is fumed silica powder. This powder is packed tight inside a strong barrier film. Then all the air gets sucked out. This vacuum stops heat moving through the panel. It works much better than regular insulation.

These panels are very thin. They save a lot of space on your roof. You don’t lose usable height inside the building. The fiberglass layers on the outside give extra strength. The panels stay flat and solid. They handle the weight and pressure on a roof. They won’t sag or break down easily. This is important for long roof life.

Installing them is straightforward. They fit neatly between roof rafters or onto decking. Their slim profile means less mess and hassle. Builders like working with them. They cut cleanly to fit odd shapes or around pipes. The tough fiberglass surface resists damage during handling.

The main benefit is big energy savings. They keep heat inside during winter. They keep heat out during summer. Your heating and cooling systems work less hard. This lowers your energy bills year-round. The insulation performance lasts a very long time. The vacuum seal stays intact. The panels don’t absorb moisture. This means consistent performance for decades.

Using these panels makes buildings more comfortable. Indoor temperatures stay steady. You avoid cold spots or drafts near the roof. They also help reduce noise from rain or wind outside. The thin design allows for more creative roof shapes too. Owners get better insulation without sacrificing space. Builders get a reliable, easy-to-use product. The upfront cost is balanced by lasting energy savings and durability.

Company Introduction

Welcome to HiphopGalaxy, a trusted global supplier of high-quality silicon dioxide (SiO2) powder, renowned for its exceptional purity and performance. Established with a vision to deliver cutting-edge materials that meet the diverse needs of modern industries, we have positioned ourselves as a leading player in the international market.

Our SiO2 powders find applications across multiple sectors, including adhesives, coatings, pharmaceuticals, cosmetics, polymers, and electronics. Each application benefits from the unique properties of our products—high surface area, excellent thixotropy, chemical inertness, and superior reinforcement capabilities. Whether you need hydrophilic or hydrophobic variants, we offer tailored solutions to meet your specific requirements.

If you have any questions, please feel free to contact us(nanotrun@yahoo.com).

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of Fiberglass VIP Panels Energy-Saving Fumed Silica Vacuum Insulation Panel For Building Roof Construction

What exactly are these Fiberglass VIP Panels?
They are thin insulation boards. They have a special core made of fumed silica powder inside fiberglass. The air gets sucked out and the panel gets sealed tight. This vacuum stops heat moving through the panel very well. They are made for roofs.

Why use them on building roofs?
Roofs lose lots of heat in cold weather. They gain too much heat in hot weather. These panels have a very high R-value. This means they block heat transfer extremely effectively. Using them cuts energy costs for heating and cooling. They are much thinner than regular roof insulation too.

How thin are they really?
These panels are incredibly thin. A typical panel might be just 20mm to 30mm thick. This thinness is a big advantage. It saves valuable space inside the building. You get top-level insulation without losing headroom. Their thin profile makes them easier to handle and install on roofs.

Can they handle weather and moisture?
Yes, the fiberglass outer layer protects the core. It is strong and resists water. The vacuum seal keeps moisture out permanently. This protection is vital for roof use. The panels stay effective for the long term. They won’t sag or lose performance from getting wet.

How do builders install them?
Builders place the panels directly onto the roof deck. They fit tightly together. Covering them with a roof membrane is essential. This protects the panels. Care is needed during installation. Sharp objects can puncture the outer skin. Punctures ruin the vacuum and the insulation stops working well. Follow the maker’s instructions exactly.

(Fiberglass VIP Panels Energy-Saving Fumed Silica Vacuum Insulation Panel For Building Roof Construction)