Trending

The high-rise building is obviously made of concrete, so why does the whole building burn after a fire? air entrainment agent

First, concrete takes in and moves warmth a lot more quickly than dissipates heat easily. When a fire happens, it has the impact of supporting burning, which is equivalent to adding fuel to the fire. The even more it melts, the larger it obtains. Con…

More>>

How does a concrete foaming agent work?

In construction, concrete is a widely used building material, and its performance is crucial to the safety and durability of buildings. Concrete foaming agents, essential additives in concrete preparation, gradually attract people's attention. This a…

More>>

Key points for door and window caulking, foaming agent VS cement, which one is better?

When installing doors and windows, how should the gaps between the opening and the window frame be dealt with? The door and window measuring tape and final production size will be 1-2cm smaller than the window to facilitate later installation and avo…

More>>

The Amazing GaN Charger Enters the Market What Advantages Does It Have

GaN-based chargers have been introduced to the market. These chargers provide a high amount of power for the device, while still maintaining a size that is reasonable, and even take up less space than the traditional chargers. Gallium Nitride, or GaN…

More>>

It is the market to decide whether graphene should continue to heat up or cool down

He believes that the graphene market in China, from a business perspective, is not "hot enough" to "reduce" the fever, and should remain "hot". It is an allotrope in which a single layer (atoms) of carbon forms a hexagonal, two-dimensional grid in…

More>>

How Much Do You Know About Wear-resistant Alumina Ceramic Linings

What is Wear-resistant Alumina Ceramic Lining?The wear-resistant alumina lining is made from a corundum special ceramic, which is formed using Al2O3 (as the main raw material) and a rare metallic oxide as a solvent. This ceramic was then calcined in…

More>>

AMPS 2-Acrylamido-2-methylpropanesulfonicacid CAS-15214-89-8

It is possible to use the homopolymer AMPS or copolymer with other monomers, such as acrylamide or acrylic acid, as a sludge-dehydrating agent and as a scale remover. Purity: >=98% Packaging: 25kg/bagShort Name: AMPS15214-89-8 : 15214-89-8 About A…

More>>

Sodium Dodecyl Diphenil Ether Disulfonate CAS 119345-04-9

Sodium Dodecyl Diphenil Ether Disulfonate (SDDEDS) is a new anionic sulfate surfactant. It is easily soluble, dispersible, compatible with hard water, and has high electrolyte stabilization.Solid content: 45% About Sodium Dodecyl Diphenil Ether Dis…

More>>

TEA dodecylbenzenesulfonate CAS 27323-41-7

TEA dodecylbenzenesulfonate is a new type of sulfate anionic surfactant. It is easily soluble, dispersible, compatible with hard water, and has high electrolyte stabilization.Solid content: 40% About TEA dodecylbenzenesulfonate: TEA dodecylbenze…

More>>

SLI-80 Sodium 2-(dodecanoyloxy)ethanesulfonate CAS 7381-01-3

SLI-80 is resistant to hard water. Its foaming properties are not affected. Solid content: 74%-83% What is ALS Ammonium Lauryl Sulfate? Ammonium Lauryl Sulfate features a rich, fine foam with low degreasing powers, good biodegradability, and low…

More>>

LAS-IPA Dodecyl-benzenesulfonic Aci Isopropylamine Salt CAS 26264-05-1

LAS-IPA foam is mild, detergent, biodegradable, and rich. Purity: 90% About Dodecyl-benzenesulfonic Aci Isopropylamine Salt: Dodecyl-benzenesulfonic Aci Isopropylamine Salt has the characteristics of rich and fine foam, low degreasing power, lo…

More>>

LAS Sodium Linear-Dodecylbenzenesulfonate CAS 25155-30-0

LAS can be made by neutralizing the dodecylbenzenesulfonic and sodium hydroxide. It is a common anionic surfactant.  Purity: 90% About Sodium Linear-Dodecylbenzenesulfonate: Sodium Linear-Dodecylbenzenesulfonate has the characteristics of rich…

More>>

Related news

3D Printing Alloy Spherical Nickel Coated Tungsten Carbide WC Powder

Recently, the Russian President hosted a meeting with oil and gas industry representatives. He said that the refusal of some Western countries to cooperate normally with Russia and deny some Russian energy resources has hit millions of European peop…

More>>

Sodium n-Octanol sulfate CAS 142-31-4, 30%

The sodium n-Octanol Sulfate is a highly stable electrolyte that has a good electrolyte stability, and good compatibility with water.Solid Content: 30 % About Sodium N-Octanolsulfate The sodium n-Octanol is soluble and compatible with hard water.…

More>>

polymer with oxirane

A non-ionic polymer with oxirane provides dynamic surface tension (DST), wettability, and defoaming as well as hard surface degreasing. Polymer with Oxirane: The polymer with oxirane has a nonionic surfactant that is highly soluble or dispersed an…

More>>

High Purity 3D Printing Nickel Alloy IN718 Powder

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

High Purity Antimony Sulfide Sb2S3 Powder CAS 1314-87-0, 99.99%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Vanadium Boride VB2 Powder CAS 12007-37-3, 99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity 3D Printing Nickel-based Alloy IN738 Powder

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity Titanium Nitride TiN Powder CAS 25583-20-4, 99.5%

Supply Magnesium Granules Mg Granules 99.95%