High Purity 3D Printing Nickel Alloy IN718 Powder

3D Printing Nickel Alloy Inconel 718 Properties:
Nickel Alloy IN718 powder is resistant to heat and corrosion.
This kind of precipitation-hardening nickel-chromium alloy is characterized by having good tensile, fatigue, creep and rupture strength at temperatures up to 700 degC (1290 degF).

Inconel 718 material properties:
Nickel Alloy INCONEL 718, a high-strength nickel-chromium metal that resists corrosion and is suitable for temperatures ranging from -423degF to 1300degF. It is easy to fabricate complex parts from this age-hardenable material. Its welding properties are excellent, particularly its resistance against post-welding cracking. The density of Inconel 718 is 8.71g/cm3 when the temperature is 300K. The melting temperature of In718 is 1430degC.

The Inconel 718 alloy has a nickel base and is ideal for applications that require high strength at temperatures ranging from low to 1400 degrees Fahrenheit. The In718 alloy has excellent impact and tensile strengths. Inconel 718 exhibits good corrosion and oxidation resistance in atmospheres within the alloy's useful strength range.

Inconel718 alloy is a precipitation-hardening nickel, chromium and iron alloy containing molybdenum. It exhibits high strength and good corrosion resistance at low and high temperatures below 650degC. It can be in a solid solution state or a precipitation hardening condition.

Inconel 718, mechanical properties
The Inconel718 alloy is an excellent material with easy processing. It has excellent properties and easy processing.

is a trusted supplier. If you're interested in purchasing 3D Printing Nickel Alloy in718 powder in bulk, please send us an email to receive the most recent inconel price. Inconel-718 plate Inconel-718 bar and other shapes are also available.

In718 Composition

How are 3D printing Nickel Alloy In718 Powder manufactured?
In the mechanical processing field, Inconel718 is a material that can be difficult to work with. It has to be processed in a number of ways.
Warm-up
It is important to clean the surface of your workpiece before and during the healing procedure. Inconel718 becomes brittle when heated in an environment containing sulfur, phosphorus or lead. Impurities are caused by fuel, lubricating, water, marking paints, chalks, lubricating, and other materials. The sulfur content in fuel should be below. The impurity levels of liquefied natural gas and liquefied shale gas should both be below 0.1%. City gas sulfur content should also be lower than 0.25g/m3. Petroleum gas sulfur content should be under 0.5%.
The heated electric stove should be able to control the temperature more accurately. Its gas should be neutral, or at least weakly alkaline.
Thermal processing
The temperature range for Inconel718 is between 1120 and 900 degrees Fahrenheit. It is important to anneal the material in time after hotworking, for best results. During hot working, the material must be heated above the processing temperature. To ensure plasticity, the temperature at which the material reaches 20% deformation should not fall below 960degC.
Cold Work
Cold working should follow solution treatment. Because the work-hardening rate of Inconel718 (which is higher than austenitic stainless) requires a different processing method, it's important to adjust the equipment and perform an intermediate annealing during the coldworking process.
Heat treatment
Material properties can be affected by different aging and solution treatments. Long-term aging can improve the mechanical properties of Inconel718 due to its low diffusion rate.
Polished
It is more difficult to remove the oxide around the weld on the Inconel718 product than with stainless steel. It must be polished with fine sanding cloth. It is necessary to remove the oxide with sandpaper, or use a salt solution before pickingling in a mix of nitric and hydrofluoric acids.
Machining
Inconel718 must be machinable after the solution treatment. Work hardening should also be taken into consideration. Inconel718 has a lower surface cutting speed than austenitic stainless.
Welding
The precipitation-hardening type Inconel718 alloy is very suitable for welding and has no tendency to crack after welding. The main advantages of this material are its weldability, easy processing and high strength.
Inconel718 has been designed for use in arc and plasma welding. Before welding the material, it should be free of any oil, powder or other contaminants.

Applications for 3D Printing Nickel Alloy Powder IN718
Our original nickel alloy for 3D-printing and additive manufacturing, Inconel In718.

In718 has a high tensile, fatigue and fracture resistance. It can resist creeping at temperatures of up to 700degC. It is easy-to-weld and has an excellent corrosion resistance. Inconel In718 may also be heat-treated.

Inconel can be used to make a variety of parts, including liquid fuel rockets, rings, casings and other formed sheet metal components for aircraft, land-based gas engines, cryogenic tanks, fasteners and instrument parts.

In718 is a high-temperature alloy that has excellent heat resistance. This makes it ideal for gas turbine and aerospace applications. Other applications include measuring probes and pumps in energy and processing technology.

Storage Conditions of IN718 powder:
IN718's performance and effects of use will be affected if the powder is exposed to dampness. The IN718 must be kept in a dry and cool room and sealed in vacuum packaging. IN718 should also not be exposed to stress.

Shipping & Packing of IN718 powder:
The quantity of powder IN718 will determine the type of packaging.
IN718 Powder Packing: Vacuum packaging, 100g/bag, 500g/bag, 1kg/bag or 25kg/barrel or your request.
IN718 Powder Shipping: Can be shipped by air, sea or express, as quickly as possible after payment receipt.


Technology Co. Ltd., () is an established global chemical supplier and manufacturer, with a 12-year history of providing high-quality nanomaterials. These include boride powders, nitride particles, graphite particles, sulfide particles, 3D-printing powders, etc.
Contact us to receive a quote. (brad@ihpa.net)