Trending

What should be paid attention to when using concrete admixtures?

Admixtures can be used for almost all kinds of concrete, but suitable admixtures must be selected according to engineering needs, construction conditions and construction technology.…

More>>

Thermal insulating refractories

Thermal insulation materials refer to materials or material composites that have significant resistance to heat flow.…

More>>

Advantages of clc lightweight foam concrete

Lightweight foamed concrete, also known as foamed cement, is a lightweight porous concrete product made from foaming agent aqueous solution into foam, and then adding foam to the slurry made of cement-based cementitious materials, aggregates, admixtu…

More>>

Foam concrete used as sound-absorbing and energy-absorbing material

The open-cell foam concrete is an excellent sound absorption material, while the closed-cell foam concrete is an excellent sound insulation material.…

More>>

Foam concrete used as thermal insulation material

Foam concrete contains a large number of closed pores, the air in the pores is a good adiabatic medium, which can cut off the heat exchange.…

More>>

Construction steps of foam concrete

Before construction, ensure that all kinds of instruments used during construction can operate normally, check their status and break the work, and the materials must be in place.…

More>>

Triethanolamine Used As Concrete Early Strength Agent

Triethanolamine is a colorless transparent viscous liquid at room temperature with a slight ammonia smell.…

More>>

Study On Early Strength Effect of Lithium Carbonate On Mortar

Mortar early strength agent is an important mortar additive, which has an important influence on the performance of mortar. it can improve construction efficiency and save construction cost.…

More>>

How is Foamed Concrete Used in Construction?

Foamed concrete is a highly entrained sand cement with at least 20% air volume in the cured product.…

More>>

Difference analysis between early strength agent and superplasticizer for concrete

Early strength admixture refers to the admixture that can improve the early strength of concrete and has no significant effect on the later strength.Superplasticizer for concreter is a concrete admixture that can reduce the amount of mixing water whi…

More>>

Differences Between Early Strength Agent and Water Reducing Agent

Early strength agent refers to the admixture which can improve the early strength of concrete and has no significant effect on the late strength.…

More>>

Differences between Early Strength Agents and Accelerating Agents

Accelerating agent is to point to the admixture that can make concrete condenses quickly after concrete hardening. Early strength agent refers to the admixture which can improve the early strength of concrete and has no significant effect on the lat…

More>>

Related news

High Efficiency Oxygen Molecular Sieve OX480

The oxygen molecular sieve TR-OX480 is primarily used in oxygen concentrator sieve beds for PSA industrial oxygen production or medical center oxygen supply systems. About Oxygen Molecular Sieve OX480: OX480 oxygen molecular Sieve is made for PSA…

More>>

FORESTALL-LQ-(MH)

To avoid reducing the concentration of vapor in the phase by coordination with odor or neutral, reduce their concentration in the phase vapor, thus achieving the desired effect. What FORESTALL-LQ(MH) is: It is both cationic (cationic) and non-ioni…

More>>

High Purity Nickel Ni powder CAS 7440-02-0, 99%

Nickel powder is a form of gray-black or gray-gray powder. The chemical formula for nickel powder is Ni. It is insoluble in water and ammonia concentrated Nitric Acid. However, it is slightly soluble in hydrochloric acid. Nickel Ni Powder: Nickel d…

More>>

High Purity 3D Printing Nickel Alloy IN718 Powder

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

High Purity Antimony Sulfide Sb2S3 Powder CAS 1314-87-0, 99.99%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Vanadium Boride VB2 Powder CAS 12007-37-3, 99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity 3D Printing Nickel-based Alloy IN738 Powder

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity Titanium Nitride TiN Powder CAS 25583-20-4, 99.5%

Supply Magnesium Granules Mg Granules 99.95%