Overview of Silica aerogel

Definition: Silica aerogel is a solid material derived from a gel, in which the liquid component of the gel has been replaced with a gas. This process results in a material that retains its gel-like structure but is extremely lightweight.

Production: It is typically produced through a sol-gel process followed by supercritical drying, which removes the liquid without causing the solid structure to collapse.

Applications: Commonly used in aerospace applications, as insulation in buildings, pipelines, and oil and gas industries due to its remarkable insulative properties.

Features of Silica aerogel

Low Density: One of the lightest solid materials known, often lighter than air, giving it a ghostly appearance.

Thermal Insulation: Possesses extremely low thermal conductivity, making it an excellent insulator even at high temperatures.

Transparency: Depending on its thickness and processing, silica aerogels can be highly transparent, allowing them to be used in certain optical applications.

Hydrophobicity: Many types of silica aerogels are treated to become hydrophobic, which helps prevent moisture absorption and enhances their durability and insulation performance.

Mechanical Fragility: Despite its impressive properties, silica aerogel is quite brittle and requires careful handling to avoid damage.

Specification of Production of Insulating Aerogel Silica-aerogel Pulver Aerogel Te Koop

Protecting Aerogel– Silica Aerogel Powder offer for sale

What It Is

Silica aerogel powder is a light-weight, highly porous product made from silica gel. It has one of the most affordable thermal conductivities of any known strong. This makes it an excellent insulator for extreme temperatures– both cold and hot.

Just how It’s Made

The manufacturing starts with a fluid silica remedy. This solution turns into a wet gel through a chain reaction. The gel then goes through a special drying out process called supercritical drying. This step removes the fluid without collapsing the delicate structure. What stays is a completely dry, ultra-light aerogel with up to 95% air by quantity. The end product is crushed right into a penalty, free-flowing powder.

Trick Features

Exceptionally low thermal conductivity: as reduced as 0.013 W/m · K at room temperature level.
High surface area: typically over 500 m TWO/ g, which helps in absorption and catalytic uses.
Reduced thickness: frequently below 0.2 g/cm ³, making it very light.
Hydrophobic or hydrophilic choices: can be dealt with to repel water or attract it, based upon your demands.
Fine fragment dimension: usually in between 1– 100 micrometers, simple to blend right into coverings, composites, or insulation mats.

Usual Uses

This powder functions well in constructing insulation, oil and gas pipes, aerospace components, protective clothes, and specialty paints. It likewise discovers use in scientific study, battery innovation, and ecological clean-up due to its high absorbency.

Handling and Storage space

Store the powder in a completely dry, covered container far from dampness and straight sunlight. Use conventional dust security gear when dealing with– gloves, safety glasses, and a mask are advised. Prevent breathing in great bits.

Order Information

We provide high-purity silica aerogel powder in lab-scale (100g) to industrial-scale (tonnage) quantities. Customized bit dimension and surface treatment choices are readily available upon request.

Applications of Production of Insulating Aerogel Silica-aerogel Pulver Aerogel Te Koop

Applications of Silica Aerogel Powder in Industrial Insulation

Light-weight Thermal Security for Severe Environments

Silica aerogel powder uses phenomenal thermal insulation in an extremely light-weight type. Its framework consists of approximately 95% air, which substantially reduces warm transfer. This makes it excellent for usage where area and weight issue. Industries such as oil and gas, aerospace, and building and construction rely upon this product to keep temperature level control without including mass.

Oil and Gas Pipes
In offshore and onshore operations, silica aerogel powder is blended into finishings or used in covering type to protect pipes. It prevents heat loss during transport of warm fluids. It also shields against cold in cool climates. The powder withstands dampness and stays effective even under high pressure.

Structure and Building and construction
Builders include silica aerogel powder to plasters, makes, and insulation panels. These products aid keep indoor areas warm in winter months and cool in summertime. Since the powder occupies little room, walls remain thin while still meeting energy effectiveness criteria. This is especially valuable in metropolitan locations where every inch matters.

Aerospace and Automotive
Airplane and electric cars need materials that insulate well however evaluate very little. Silica aerogel powder fits this requirement perfectly. It is used in battery packs, cabin walls, and engine areas to manage heat securely. Its fire-resistant nature adds an additional layer of security.

Industrial Devices
Factories utilize the powder to shield reactors, storage tanks, and exhaust systems. It reduces power waste and improves procedure performance. Unlike conventional insulators, it does not weaken promptly when exposed to vibration or temperature level swings.

Silica aerogel powder delivers solid performance with minimal product. It works across lots of areas where dependable, portable insulation is important.

Company Introduction

Welcome to HiphopGalaxy, a trusted global supplier of high-quality silicon dioxide (SiO2) powder, renowned for its exceptional purity and performance. Established with a vision to deliver cutting-edge materials that meet the diverse needs of modern industries, we have positioned ourselves as a leading player in the international market.

Our SiO2 powders find applications across multiple sectors, including adhesives, coatings, pharmaceuticals, cosmetics, polymers, and electronics. Each application benefits from the unique properties of our products—high surface area, excellent thixotropy, chemical inertness, and superior reinforcement capabilities. Whether you need hydrophilic or hydrophobic variants, we offer tailored solutions to meet your specific requirements.

If you have any questions, please feel free to contact us(nanotrun@yahoo.com).

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of Production of Insulating Aerogel Silica-aerogel Pulver Aerogel Te Koop

Frequently Asked Questions About Silica Aerogel Powder

What is silica aerogel powder?

Silica aerogel powder is a very light and porous material made from silica gel. It has a sponge-like structure filled with air. This gives it excellent insulation properties. People use it in construction, aerospace, and industrial applications where heat resistance and low weight matter.

How is silica aerogel powder made?

The production starts with a liquid silica solution. This solution turns into a wet gel through a chemical reaction. Then, the liquid inside the gel is removed using a special drying method called supercritical drying. This keeps the structure intact while replacing the liquid with air. The final product is crushed into fine powder for easy handling and use.

Why choose aerogel powder over other insulators?

Aerogel powder offers much better thermal insulation than most traditional materials. It is extremely lightweight and takes up little space. It also resists high temperatures and does not catch fire easily. These features make it ideal for tight spaces or situations where weight and safety are important.

Is silica aerogel powder safe to handle?

Yes, but you should take basic precautions. The powder is not toxic, but like any fine dust, it can irritate your eyes, skin, or lungs if inhaled. Always wear gloves, safety glasses, and a dust mask when working with it. Store it in a sealed container away from moisture.

Where can I buy silica aerogel powder?

You can buy silica aerogel powder from specialized suppliers online or through industrial material distributors. Make sure the seller provides clear product specs, safety data sheets, and proper packaging. Check reviews or ask for samples before placing a large order.