Overview of Silica aerogel

Definition: Silica aerogel is a solid material derived from a gel, in which the liquid component of the gel has been replaced with a gas. This process results in a material that retains its gel-like structure but is extremely lightweight.

Production: It is typically produced through a sol-gel process followed by supercritical drying, which removes the liquid without causing the solid structure to collapse.

Applications: Commonly used in aerospace applications, as insulation in buildings, pipelines, and oil and gas industries due to its remarkable insulative properties.

Features of Silica aerogel

Low Density: One of the lightest solid materials known, often lighter than air, giving it a ghostly appearance.

Thermal Insulation: Possesses extremely low thermal conductivity, making it an excellent insulator even at high temperatures.

Transparency: Depending on its thickness and processing, silica aerogels can be highly transparent, allowing them to be used in certain optical applications.

Hydrophobicity: Many types of silica aerogels are treated to become hydrophobic, which helps prevent moisture absorption and enhances their durability and insulation performance.

Mechanical Fragility: Despite its impressive properties, silica aerogel is quite brittle and requires careful handling to avoid damage.

(Modern Design Low Lambda Aerogel VIP Panel 50mm Silica Vacuum Insulation Wall Temperature Stability Maintained 10mm Thickness)

Specification of Modern Design Low Lambda Aerogel VIP Panel 50mm Silica Vacuum Insulation Wall Temperature Stability Maintained 10mm Thickness

This is the Modern Design Low Lambda Aerogel VIP Panel. It is 50mm thick. The panel uses silica vacuum insulation. This insulation is very effective. It keeps heat inside buildings very well. The lambda value is very low. This means heat moves through the panel slowly. Heat loss is minimal. You save energy. Your heating costs go down.

The core uses silica aerogel. Aerogel is a special material. It is mostly air. But it traps heat effectively. The vacuum seal adds even more insulation power. Together they create a strong thermal barrier. Cold stays out. Warmth stays in. Your indoor temperature stays steady. This happens even when outside temperatures change a lot. The panel maintains temperature stability well.

A 50mm thickness offers great performance. It gives high insulation levels. You don’t need thicker materials. This saves space. You gain more usable room area. The thin profile is important. It fits easily into walls. Installation is simpler. The panel is lightweight too. Handling it is easy. Builders like working with it.

The panel handles different temperatures reliably. It performs consistently. Hot summers or cold winters make no difference. The insulation works year-round. You get dependable thermal protection. Comfort improves inside your home or office. You avoid cold spots near walls. You also avoid drafts. The building feels better.

This panel suits new construction projects. It also works for renovations. Upgrading old buildings is possible. Wall insulation upgrades are common. Energy efficiency standards are easier to meet. The product helps achieve green building goals. Lower carbon footprints result. Environmental impact reduces.

(Modern Design Low Lambda Aerogel VIP Panel 50mm Silica Vacuum Insulation Wall Temperature Stability Maintained 10mm Thickness)

Applications of Modern Design Low Lambda Aerogel VIP Panel 50mm Silica Vacuum Insulation Wall Temperature Stability Maintained 10mm Thickness

Modern design low lambda aerogel VIP panels offer top insulation. They use silica gel inside a vacuum seal. This structure stops heat moving through walls. The 50mm thick panels work very well. You get strong thermal resistance without big bulk. Temperature stays steady inside rooms. This is key for places needing exact climate control. The panels hold stable temps with just 10mm thickness. They fit tight spaces easily.

These panels serve many building jobs. Use them in cold storage units or food warehouses. They keep freezing temps locked in. Put them inside walls for homes or offices. Heat stays inside during winter. Cool air stays inside during summer. Energy bills go down. Comfort goes up. Factories use them too. Machines run better at steady temps. Production quality improves.

The VIP panel design is smart. It packs high insulation power into thin layers. You save space compared to old foam blocks. Walls stay thinner. Rooms stay bigger. The vacuum inside blocks heat flow better than air. Nothing moves inside the vacuum. Heat cannot pass through easily.

Installation is straightforward. The panels are light but strong. Workers handle them safely. They cut to size on site. The panels resist crushing or bending. They last for years without sagging. Maintenance is low. No special cleaning needed. Just wipe surfaces if dirty.

These panels beat regular insulation. Foam needs much more thickness for similar results. Old materials lose power over time. Aerogel VIP keeps performing. It also stops heat leaks at edges better. Fewer gaps mean better efficiency. Buildings stay warm or cold as planned.

The panels help meet strict energy rules. New laws demand better insulation. This product makes compliance simple. Architects like the slim profile. Builders like the easy fitting. Owners like the energy savings. Everyone wins.

Regular foam insulation takes more room. It often requires extra supports. Things get messy and dense. Modern aerogel VIP avoids those troubles.

Company Introduction

Welcome to HiphopGalaxy, a trusted global supplier of high-quality silicon dioxide (SiO2) powder, renowned for its exceptional purity and performance. Established with a vision to deliver cutting-edge materials that meet the diverse needs of modern industries, we have positioned ourselves as a leading player in the international market.

Our SiO2 powders find applications across multiple sectors, including adhesives, coatings, pharmaceuticals, cosmetics, polymers, and electronics. Each application benefits from the unique properties of our products—high surface area, excellent thixotropy, chemical inertness, and superior reinforcement capabilities. Whether you need hydrophilic or hydrophobic variants, we offer tailored solutions to meet your specific requirements.

If you have any questions, please feel free to contact us(nanotrun@yahoo.com).

Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

5 FAQs of Modern Design Low Lambda Aerogel VIP Panel 50mm Silica Vacuum Insulation Wall Temperature Stability Maintained 10mm Thickness

People often ask about our Modern Design Low Lambda Aerogel VIP Panel. They want to know how it works. They want to know why it’s different. Here are five common questions.

What makes this VIP panel special? It uses silica aerogel inside a vacuum. This material is very light. It traps heat extremely well. The result is super-low thermal conductivity. This means it keeps heat in or out very effectively. It beats regular insulation materials easily.

How does it maintain temperature stability? The vacuum inside the panel is key. It stops heat moving through the air. The aerogel structure also blocks heat flow. Together, they create a powerful barrier. This barrier keeps temperatures steady. It prevents big heat losses or gains. Your space stays comfortable.

Is 50mm the only thickness? No, we offer different thicknesses. The 50mm panel is common for walls. We have thinner options too. The 10mm thickness is available. It still offers good insulation. Use it where space is tight. Thicker panels give even higher performance.

Where can I use these panels? They are very versatile. Use them in walls, roofs, or floors. They fit homes, offices, or special buildings. They are perfect for renovations. They save space compared to bulky insulation. They also work great in cold rooms. They keep the cold inside efficiently.

Is installation difficult? Not really. You handle it like other rigid boards. Cut it carefully to fit the space. Support it properly during fitting. Avoid puncturing the vacuum seal. Damaging the seal reduces performance. Follow the provided instructions closely. Professional installers recommend care. Proper installation ensures top results.

(Modern Design Low Lambda Aerogel VIP Panel 50mm Silica Vacuum Insulation Wall Temperature Stability Maintained 10mm Thickness)