High Purity Tungsten Disulfide WS2 Powder CAS 12138-09-9, 99.9%

Tungsten dioxide is the mineral's name. Molecular formula: 247.97 molecular masses WS2. You can also purchase this product in hexagonal format. Purity: 99.9%. Partilcle sizes vary between 70 and 300nm

About Tungsten Disulfide WS2: Tungsten disulfide This organic compound is composed both of sulfur and tungsten, along with other elements. Tungsten disulfide chemical formula It is WS2 . It's part of the Transition-Metal Dihalides. It is the rarest form of tungsten. This material is part of certain catalysts used for hydrodesulfurization and hydrodenitrogenation. WS2 tungsten disulfide It is similar in structure to MoS2 as well as a type of MoS2; it replaces MoS2’s coordinatesphere with Watoms. These are contained within a triangular prism. After 1992, the heating of this layer structure led to formation inorganic Nanotubes (W2)
The majority of WS2 Crystals appear dark gray and have hexagonal shapes. The WS2 Crystals can also be seen layered. The WS2 Crystal is similar to MoS2, a dry oilslubricant.
Many thought that WS2 would be unaffected by ambient oxygen. Studies on single-layer, environment-dependent WS2 oxidation have revealed that the contrary is true. One layer of WS2 is transformed quickly into tungstenoxide by photooxidation. The photooxidation reaction can be performed under ambient or atmospheric conditions. The visible wavelength of light, 660nm/>1.88eV is absorbed and oxidized by WS2. The reaction can only occur if there is water and oxygen. The products will be tungsten oxide and sulfuric acid. Similar results were observed for semiconductor transitional metallic dihalides, such as MoS2, when they were exposed to ambient light.
Combining hydrofluoric acids and nitric can cause WS2 to be attacked. In oxygen rich areas, WS2 may turn to tungsten dioxide if heated. The problem is that WS2 doesn't melt with oxygen. Instead, it will decompose into tungsten oxide. At 1250oC, WS2 will melt.
Chemical exfoliation has been used to get rid of monolayers WS2 in the past. It involves placing lithium in Hexane then applying ultrasonics to the Li compound. You can use different agents to get rid of WS2, such as lithium halide and chlorosulfonic.

For the most current information send an inquiry Tungsten disulfide Prices Get tungsten d if you wish to Isulfide powder Bulk buying is possible.

Tungsten Disulfide details:
Tungsten Dioxide particle sizes: FSSS=0.4 to 0.7 mm; FSSS=0.85-1.15 mm. 80nm
Tungsten Disulfide purity: 99.9%

W S Al As Cl Cu Fe Ni P Si O
74.12 25.82 0.001 0.002 0.03 0.002 0.005 0.002 0.002 0.003 0.002

It's simple. Tungsten Disulfide WS2 produced?
1. Roasting decomposition method:
At temperatures of between 57-60degC, stir the mixture continuously for three hours. Keep the mixture warm for 16 hours. To create ammonium-tungstate, the ammonium and hydrogen sulfide gases react. Ammonium Tetrathiotungstate is the result of this reaction. It can then be converted to tungstenoxide by heating it at high temperatures.
H2WO4+2NH3*H2O-(NH4)2WO4+2H2O
(NH4)2WO4+4H2S-(NH4)2WS4+4H2O
2(NH4)2WS4+3O2-2WS2+4NH3+2S+2SO2+H2O
2. Tungsten reacts slow with liquid sulfur. You can make WS2 by changing the sulfur vapor color to red hot. Mixing tungsten with a stoichiometric sulf flower can create WS2. Reacting at 600pa, or 1600pa can create orthorhombic compounds.
3. By heating the ammonium-tetrathiotungstate and decomposing it, under the condition that the air is isolated, the temperature increases from room to 700 to 1200. After being kept at room temp for between 24-48 hours and decomposing it, the temperature drops to ambient using a temperature gradient that is 30-110degC/hour. After it has been kept at room temperature for 24 to 48 hours, the temperature gradient is 30-110degC/hour.
This process produces ultrafine and scaley tungsten dioxide. This doesn't cause any environmental damage.

Applicaciones Tungsten Disulfide WS2:
Tungsten disulfide
That's how it can be done. tungsten disulfide lubricant, tungsten disulfide grease.
Tungsten Disulfide2 W2 is an exceptionally smooth and dry friction film coating. Tungsten Dioxide (WS2) has 0.03 friction coefficient. This makes it more efficient that graphite(PTFE), graphite[MoS2], or graphite („MoS2 ")).“). It is highly lubricious. This can be used for the production of electronics equipment such as sensors and transistors. You can mix this powder with alcohol or water.
For extrusion, plastic, and any other type of molding use WS2.
There is no need for hydraulic oil. It can be mixed with synthetic oil or grease. Because of its affinity for fluid layers it can preserve them. Oil and grease are not allowed to get on the surface. This increases the level of lubrication.
For parts less than 1 micron, tolerances might be possible.
The WS2 can also be used for cooking and the maintenance of medical equipment.
At ambient temperatures, WS2 can replace base materials purchased from customers. It does not make the substrate unstable or inconstant.
Combining WS2 or PVD hard coated can improve durability.

Tungsten Disulfide Powder Storage Conditions:
You should never keep tungsten dioxide powder in the air. Dampness can impact the dispersion performance of WS2 powder as well. When using WS2 Powder, avoid stress.

Packing and Shipping Tungsten Disulfide WS2 Pulver:
The size and type of Tungsten oxide W2 powder can be packaged in a variety of ways.
Tungsten Disulfide Powder Packaging: vacuum packing 100g to500g at 1kg/bag @ 25,5kg/barrel. You can also request additional options
Tungsten diulfide Powder Shipping: After payment receipt received, can ship via sea or air.


Nanotechnology Co. Ltd. enjoys a solid reputation as a trustworthy manufacturer and distributor of premium-quality chemical material. There is graphite as well, or graphite as boride.
What you need is high-quality, top-quality merchandise tungsten disulfide powder Feel free to reach out to us with any questions. ( brad@ihpa.net )

Tungsten Sulfide Properties

The other titles tungsten sulfide (WS2), tungsten disulphide,
tungsten(IV) sulfide, WS2 powder
12138-09-9
Combined Formula WS2
Motility 247.97
Appearance Black powder or gray powder
Melting Point 1250 degC
Boiling Point N/A
Density 7.5 g/cm3
Solubility N/A
Exact 247.895074

Tungsten Sulfide Health & Safety Information

Alert
Hazard Statements H315-H319-H335
Hazard Codes Xi
Risk Codes 36/37/38
Privacy statement 26-37/39
Transport Information N/A

Inquiry us

PREVIOUS Sulfide Powder

NEXT Sulfide Powder

Our Latest Products

High Purity Crystalline Silica powder Crystalline Quartz Powder SiO2,99.8%

Crystalline silica powder is the crystal version of silica. It can be made by crushing silica, classifying it and then grinding. Quality: 99.8%. 600 mesh About Crystalline Silica Powder Crystalline Quartz Powder SiO2 : Silica crystallin…

High Purity AlN Ceramic Powder Injection Molding Components

The metal will not corrode when exposed to other molten metals or molten molten. It will not corrode from moly steel. About AlN Ceramic Powder Injection Molding Components : Formal chemical for aluminum nitride AIN. Aluminum Nitride…

High Purity Aluminum Nitride AlN Ceramic Microsphere, 99.5%

AlN protects electrical circuits. AlN powder can be used to increase your thermal conductivity. About AlN Ceramic Microsphere Aluminum Nitride AlN : Aluminum Nitride This ceramic material does not undergo oxidization. Nearly all of it i…

0086-0379-64280201 brad@ihpa.net skype whatsapp