Newshiphopgalaxy

Concrete Admixtures

  • 0
  • 0

Maltodextrin

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



Maltodextrin is only to be used with water reducers and pumps agents. This concrete retarder can defer the hydration of cement, allowing concrete to move from the station onto the site when it's needed.

Description This is Maltodextrin Maltodextrin can be referred to as a starch derivative, but it does not have free starch. It is refined using an enzyme process and then dried spray-dried.

Technical Parameters Maltodextrin
Articles Appearance DE Value (%) Moisture (%) Solubility PH Value Sulfate Ash (1%)
Standard Yellow or white >=99.0
<=0.01
<=0.001% 4.5-6.5 <=0.6


Concrete uses maltodextrin
In building materials admixture, maltodextrin may be added to slow down the setting and delay heat of hydration.
Maltodextrin, when compared to other retarders has a greater effect on concrete and better workability.
Maltodextrin is only to be used with water reducers and pumps agents. This concrete retarder can defer the hydration of cement, allowing concrete to move from the station onto the site when it's needed.

Be aware of the following: Maltodextrin
1. This product is not toxic and innocuous, it can be biodegradable. It cannot however, be eaten.
2. You should rinse it with lots of water if it gets in your eyes.
3. A doctor should be consulted immediately if allergies are caused to an organ of the body.


Inquiry us

PREVIOUS NEWS

Sodium Gluconate

High Purity 3D Printing Nickel Alloy IN718 Powder

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

High Purity Antimony Sulfide Sb2S3 Powder CAS 1314-87-0, 99.99%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Vanadium Boride VB2 Powder CAS 12007-37-3, 99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity 3D Printing Nickel-based Alloy IN738 Powder

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity Titanium Nitride TiN Powder CAS 25583-20-4, 99.5%

Supply Magnesium Granules Mg Granules 99.95%

Our Latest Products

High Purity 3D Printing Nickel Alloy IN718 Powder

In718 Powder is widely used for industrial and aviation turbo-propellers, petrochemical, nuclear reactors, and other fields.Particle Size: 15-45mm; 15-53mm; 53-120mm and 53-150mm 3D Printing Nickel Alloy Inconel 718 Properties: Nickel Alloy IN71…

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have high wear resistance. They are widely used by the electricity, electronics and energy industries. Metal Al…

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Germanium Sulfide (GeS2) is a semiconductor compound with the chemical Formula GeS2. It has a high solubility level in water. It's also easily soluble when heated alkali is used.Particle size : 100mesh Purity: 99.99% About Germanium Sulfide (GeS2)…