Zirconium carbonide (ZrC), a refractory ceramic that has a high hardness, is used commercially to make tooltips. It's usually made by sintering.
Particle size: -325mesh
Zirconium Carbide Pulver:
Zirconium carbide ZrC
It is used commercially to cut tooltips. It is often sintered.
It is hard.
Temperature is 5100degC It has 6.70 grams per cubic meter. Mohs hardness ranges from 8-9 Is insoluble with cold water and hydrochloric acids. It dissolves in hydrofluoric and hot concentrated sulfuric, nitric acid- or hydrogen peroxide. At high temperatures, it reacts with chlorine to make zirconium trichloride. It burns at 700 degrees Celsius in the air and produces zirconia. You should not mix it with water.
It is a powder of gray metal with cubic crystal structures. High resistance to corrosion. These interstitial transition metal carides of group IV are members of the ultra-high temperatures ceramics (UHTC). ZrC's thermal conductivity is 20.5 W/m*K, and its electrical conductivity (resistivity is 43mO*cm) are both similar to zirconium. Due to the strong ZrC covalent bond, ZrC has a very high melting temperature (3530degC), high module (440 GPa), as well as a low hardness (25 GPa). ZrC's density is 6.73g/cm3 lower than that of other carbides, such as TaC (14.75 g/cm3) and HfC (12.67g/cm3). ZrC appears to be suitable in reentry, rocket/hyperjet and supersonic aircraft where high density is a critical requirement.
As with most carbides from refractory materials, zirconium carbonide is substoichiometric. It contains carbon vacancies. If the content of carbon exceeds ZrC0.98, it is considered free carbon. Between 0.65 and 0.98, the ZrC-to-carbon ratio to metal is stable.
To receive the latest information, send us an inquiry
Zirconium carbide price
Please fill out the form below if you wish to
buy Zirconium Carbide ZrC Powder
Zirconium Carbide Nanoparticles Nano ZrC Pulse Product Performance:
Zirconium carbonide nanoparticles, CAS 12070-14-3, have high purity, small particles, uniform distribution and high specific surface activity. High melting point, high strength, corrosion resistant high-temperature material is Nano ZrC. This powder can absorb visible light efficiently, reflect infrared, and store energy.
Technical Parameter: Zirconium Carbide Nanoparticles NanoZrC Pulp:
It is simple.
Zirconium Carbide ZrC Powder
The color of the sky
Zirconium Carbide Nanoparticles
Zirconium carbonide can be made in many different ways. A carbothermal reaction is one way to make zirconium carbide. This produces powder. By sintering ZrC at temperatures higher than 2000°C, dense ZrC is possible. ZrC powder can also be hot pressed to lower its sintering temperatures, resulting in fine ZrC particles. Full-density ZrC can be made by spark plasma sintering.
You can also make zirconium carbide using solution-based processes. It is done by heating the metal oxide in acetylacetone.
Chemical vapor deposition (CVP) is another method of manufacturing. It is possible to heat the zirconium sponge, and also decompose the gas halide.
ZrC cannot be used if it has a lower oxidation rate than 800degC. The preparation of composite materials is one way to increase the resistance to oxidation for ZrC. ZrCZrB2 is the preferred composite material. These composite materials are capable of working at temperatures above 1800°C. This situation can be improved by using another material, like TRISO fuel particles.
Zirconium Carbide ZrC Powder:
Zirconium carbide is a type of high melting material that has high hardness, excellent heat refractory and high hardness. This material is commonly used to make alloy steel. Also used to make zirconium and zirconium trioxide chloride. Zirconium carbonide can be used incandescently. It's mainly used now as an abrasive. This can be used to make cemented carbide.
Zirconium carbonide is a ceramic hard material that can be used for cutting. The zirconium carbonide (ZRC), which is made by sintering has high temperatures oxidation resistance and high strength. It also exhibits high thermal conductivity, toughness, and high toughness. Additionally, nanopowders of zirconium carbonide (ZrC), exhibit high visible light absorption, great infrared reflection, and have large energy storage capabilities.
As refractory coats in nuclear reactors, ZrC is not used. It is less susceptible to radiation damage and has a lower neutron absorption. You can use it as a protective coating on uranium dioxide, OR dioxide, and other particles of nuclear fuel. Coatings can be deposited using superheated chemicalvapor Deposition in a fluidized-bed reactor. The material has excellent emissivity at high temperatures and high current capacities, which makes it ideal for use in thermo-photoelectric heaters, field emitter tips, and arrays.
These cemented carbide compound can be used to drill and make other tools with wear resistance because of their hardness. Zirconium carbide, also known as ZrC (zirconium carbide), is a highly-temperature structure material that has high melting points and excellent strength. This material can be strengthened and resistant to corrosion by using cemented carbide.
Zirconium carbide nanoparticles may be used in the metalurgical, chemical, or aerospace industries. The textile industry can use it to produce nylon and other carbide-thermostatic textiles. They are also used to create composites for metal substrates and ceramics.
Transport and packing of Zirconium Carbide Nanoparticles Nano ZrC Pulp:
We offer many packing options that are dependent on the quantity of zirconium-carbid nanoparticles.
Zirconium carbide nanoparticles packing:
You can vacuum pack 1kg/bag, 25kg/barrel or according to your requirements.
Shipment of Zirconium Carbide Nanoparticles
A payment receipt can allow for shipping by sea, air or express.
Whatsontianjin advanced materials Nano Technology Co. Ltd., (Whatsontianjin), is a reliable global supplier and manufacturer who has over 12-years of experience in producing super-high-quality chemicals.
We can provide high-quality zirconium carbonide powder. Please contact us to send an inquiry. (