News

  • 0
  • 0

Molybdenum Disulfide MoS2 For Lubrication

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



Aluminium buyers in the US physical metal market have held off on new orders amid fears of a recession triggered by rising inflation and supply chain crises.  

Spot aluminium trading on the market has been suspended in recent weeks, according to industry sources, as uncertainty has increased following the outbreak of the conflict between Russia and Ukraine.  Even before the war, the aluminium market was suffering from long waiting times and weak demand.  

For aluminium buyers, recent poor US economic data have been a big factor in delaying purchases.  Data released last month showed that the ISM manufacturing PMI came in at 57.1 in March, below expectations of 59 and down from 58.6 in February, unexpectedly hitting the lowest reading since September 2020.  This was mainly due to a slowdown in new orders and MoS2 powder are expected to increase in the future.

Molybdenum disulfide (MoS2) is known as the "king of lubrication" and has its unique advantages in the field of lubrication. It has a layered structure and still maintains good lubrication performance under harsh conditions such as high temperature, high pressure, high rotation, ultra-low temperature and so on. Because of its low friction coefficient, MoS2 is a natural excellent solid lubricant. It also has excellent properties, such as natural weak alkalinity, excellent antioxidant capacity, used in the aviation field, can extend the mileage of engine oil.
 
MoS2 is a kind of black solid powder with metallic luster, its melting point is as high as 1185, and its chemical stability and thermal stability are good. In the metal, the Mohs hardness is low, which is 1.0-1.5. The initial temperature of decomposition is 1370. When it reaches 1600, it decomposes into metal molybdenum and sulfur. MoS2 is insoluble in many substances, such as water, dilute acid and concentrated sulfuric acid, nor in other acids, bases and organic solvents, but it will dissolve when it comes into contact with aqua regia and boiling concentrated sulfuric acid.
 
The basic material of molybdenum disulfide lubricant is made of ultra-fine MoS2. When the lubricant is applied to the metal surface, a dry film will be quickly formed on the metal surface, so that the surface of the metal parts can form a protective film, which can withstand high temperature, strong pressure, toughness, parts are not easy to wear, burn and bite.
 
Friction wear almost appear in a variety of industries, such as aerospace, automobiles and ships, mechanical heavy industry, bearing gears, etc. MoS2 can be widely used in many occasions of lubrication. For example:
 
1. Slides for cabinets or drawers, guide rails for elevators, bearings for motors, etc. Under high load, these parts are under great pressure and need lubricants to reduce friction and prolong service life.
 
2. In the process of material processing, in order to punch and punch the material, it is necessary to apply lubricant to minimize the friction between the die and the plate, produce a finished product that meets the requirements, and prevent the surface of the material from rusting.
 
3. When the temperature of the rear wheel increases while driving, it is easy to throw oil, which will lead to brake failure. The application of MoS2 to the four-wheel bearing of automobile chassis can improve the lubrication performance, save oil and reduce the temperature of the four wheels when driving.
 
4. In some extreme conditions, fasteners, threads, etc., are easy to slip teeth or bite to death during assembly, and need to be coated with lubricant to reduce friction, prevent parts from getting stuck, and prevent rust.
 

Molybdenum Disulfide MoS2 Powder Supplier
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and nanomaterials including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality MoS2 powder, please feel free to contact us and send an inquiry. ([email protected])

 

Russia's Rokot-M carrier rocket is scheduled to launch for the first time in 2024. 

The first launch of the Rokot-M carrier rocket is planned for 2024 from the Plesetsk cosmodrome, the general manager of the Khrunichev National Space Research and Production Center told TASS. The Rokot-M, a lightweight carrier rocket powered by liquid fuel, began development in 2018, with The Russian side using domestic components instead of Ukrainian components.

Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials including graphite powder, 3D printing powder, the MoS2 powder, etc. If you are looking for high-quality materials, please feel free to contact us and send an inquiry.

Inquiry us

High Purity 3D Printing Nickel Alloy IN718 Powder

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

High Purity Antimony Sulfide Sb2S3 Powder CAS 1314-87-0, 99.99%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Vanadium Boride VB2 Powder CAS 12007-37-3, 99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity 3D Printing Nickel-based Alloy IN738 Powder

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity Titanium Nitride TiN Powder CAS 25583-20-4, 99.5%

Supply Magnesium Granules Mg Granules 99.95%

Our Latest Products

High Purity 3D Printing Nickel Alloy IN718 Powder

In718 Powder is widely used for industrial and aviation turbo-propellers, petrochemical, nuclear reactors, and other fields.Particle Size: 15-45mm; 15-53mm; 53-120mm and 53-150mm 3D Printing Nickel Alloy Inconel 718 Properties: Nickel Alloy IN71…

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have high wear resistance. They are widely used by the electricity, electronics and energy industries. Metal Al…

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

Germanium Sulfide (GeS2) is a semiconductor compound with the chemical Formula GeS2. It has a high solubility level in water. It's also easily soluble when heated alkali is used.Particle size : 100mesh Purity: 99.99% About Germanium Sulfide (GeS2)…